de v6performance.net:
------------------------------------------
from Brian himself (at Hasport)
The K mounts will be made for the 4th, 5th and 6th gen Accords as well as some of the Preludes. Threr is no news as to release at this time but you can email me at brian@hasport.com in a month and maybe I will have some sort of progress report.
brian g
------------------------------------------
Si on pouvais fitter un série K dans nos chars, ce serais bien ???? Est-ce qu'il y aurais du trouble avec les transmissions/intake/exhaust à les faire fitter ??? PCQ c'est pas les séries K qui ont la tranny du côté opposé ???
K series Hasport mounts
Modérateur : Modérateurs
-
manex-r
- Messages : 772
- Inscription : mar. mars 15, 2005 3:00 am
- Localisation : Québec, QC
Trouver sur http://board.hondasociety.com/showthread.php?t=115927
et ici http://board.hondasociety.com/showthread.php?t=116581
En gros, pour l'instant, ca revient cher, mais plus de potentiel NA qu'un h22.
Et regarder le dernier lien, les dernières photos de la page...
Frankenstein much? That's an F20C bolted to the Y2M3 transmission (DC5 Integra Type-R).
That's right. the F20C motor is interchangable with the K-series transmissions. Now we can have 240hp stock in a FWD without problems. I know some techs had done research on getting the F20C working with H and other F series transmissions, and they all bolted up, but in spinning in opposite directions, they ran into problems.
Not anymore, it seems...
